Used to detect smoke during fires
Alarm for use with the fire detection system
The manual call point is mainly designed to be used with an intelligent two-bus control panel. If it is pressed after a fire is manually confirmed, an alarm signal may be sent to a fire alarm control panel which will, after receiving the alarm signal, display the coded address and the equipment status of the manual call point. When the manual call point is operating normally, the red indicator will blink; when there is a fire alarm, it will remain lit.
For 24-hour automatic fire detection, we add a Control Panel with Detection Circuitry and Automatic Actuation System.
A Fire Hydrant Valve is a pipe fitting that helps to regulate, direct or control the flow of fire suppressing agents by opening, closing or partially obstructing passageways in the hose connectors. Non-return valves stop the fire suppressing agent from flowing in the wrong direction.
Fire nozzles and branchpipes can be fitted quickly and easily – removing the need to replace entire unit
ANSULEX Low pH Liquid Fire Suppressant is designed for use only in ANSUL® R-102 restaurant fire suppression systems. This ''liquid'' agent will combat grease-related fires as found in restaurant appliances and ventilating equipment. It should not be used for fires involving energized electrical hazards.
The Fortex fire hose is an all-purpose Nitrile Rubber Fire Hose. It is a multi-purpose hose for many industries and can be used for the liquid transfer of chemicals, hydrocarbons & gasoline and all agricultural and irrigation applications.
The 2.0kg Aluminium Alloy CO2 Fire Extinguisher from the Safequip range is CE0036 TUV approved. These extinguishers are specifically designed for fires involving flammable liquids and electrical hazards, Class C and Class B fires.
The 5kg Aluminium Alloy CO2 Fire Extinguisher from the Safequip range is CE0036 TUV approved. These extinguishers are specifically designed for fires involving flammable liquids and electrical hazards, Class C and Class B fires.
This 2kg CO2 alloy steel extinguisher is specifically designed for fires involving flammable liquids and electrical hazards, Class C and Class B fires. Our top-quality SANS 1567 certified carbon dioxide fire extinguishers are cased in steel or aluminium and are purposefully designed to be user-friendly.
The 5kg CO2 alloy steel extinguisher is specifically designed for fires involving flammable liquids and electrical hazards, Class C and Class B fires. Our top-quality SANS 1567 certified carbon dioxide fire extinguishers are cased in steel or aluminium and are purposefully designed to be user-friendly.
The DCP 1.0kg Fire Extinguisher (Firemate) is suitable for Class A, B or C fires, or a combination of these types.
The DCP 0.6kg Fire Extinguisher (Firemate) is the smallest extinguisher in this range and suitable for Class A, B or C fires, or a combination of these types.
The DCP 1.0kg Fire Extinguisher (Firemate) is suitable for Class A, B or C fires, or a combination of these types.